The headlights are not bright enough or yellow and cloudy? Here’s the answer!
Step 1
I find it much easier to remove the case for most brands and models, but this can be done with the installation window. However, it is your choice if you want to delete, see your owner’s manual to prevent damage to your vehicle.
Step 2
Use sandpaper 1500 and bottle of water, keeping the lights at any time during wet grinding in a circular motion that is sure to get all sectors of the headlights. The water on the surface of the lamp will be yellow for the future air May Milky Way, in this case, use spray and wash then start over, repeating until the milky water in a clean-looking surface. Rinse with a sterile bottle and then wipe dry with a clean cloth. Drying of the title tag becomes cloudy.
Step 3
At this point you want to use some ‘rubbing alcohol with a clean cloth and wipe the entire surface of the headlights, wait about 5 minutes. Now you want to set up the lighthouse or hang in a dry and well ventilated, lighted at chest height. Now, with a clear spray lacquer and stay of 8 to 12 inches of the surface lightly sprinkled with Lighthouse is not recommended to try to get all the areas a little at first hand, give 5 or 10 minutes to dry and then put another coat, being careful to cover the whole surface gently to avoid races. Let dry for 20 to 30 minutes before reinstalling groped in the vehicle.